SpletBackground LTRC Common Tack Coat Types. – Hot asphalt cements, – Emulsified asphalts, – Cutback asphalts. Paul and Scherocman conducted a tack coat survey. – Most emulsions used are SS-1, SS-1h, CSS-1 and CSS-1h. – Only one state (Georgia) used hot asphalt (AC-20, and AC-30) as tack coats. – The residual application rates varied. … SpletTack Coat. Furnish CSS-1H, SS-1H, or a PG binder with a minimum high-temperature grade of PG 58 for tack coat binder in accordance with Item 300, “Asphalts, Oils, and …
Hot-Mix Asphalt - Prime Coat - Illinois
SpletApplying a bituminous tack coat is an integral part of an asphalt paving project. Research by the asphalt industry and PennDOT on the use of tack coat has resulted in some recent … how old is elaine luria
341 Special Specification 3076 Dense-Graded Hot-Mix Asphalt
SpletThe study found that the optimum tack coat residual rate was 0.04 gal/yd2(0.18 L/m2) for trafficked and nontrafficked unmilled aged HMA surfaces, while the optimum residual rate for milled HMA was 0.06 gal/yd2(0.26 L/m2). SS-1vh tack coat showed superior performance over the other tested tack coats. SpletD. Tack Coat. Hot applied trackless tack coat is required. E. The Engineer will obtain at least one sample of the tack coat binder per project and test it to verify compliance with Item 300. The Engineer will obtain the sample from the asphalt distributor immediately before use. F. Additives. Spletapplying a proper tack coat are followed. It should also be noted that in the past few years, there are several companies that have developed special tack coat products. Under the 2004 standard specifications, these specialty tack coat products can be used “when shown on the plans or approved” by the engineer. how old is elaina from wandering witch